KAILH Low Profile Switch 1350 Chocolate RGB SMD (10, Choc Brown) Review (2026)

Fit for the job

This pack targets people who already own or are planning a low profile keyboard built around the Kailh Choc footprint, common on slim split boards and compact 40 percent layouts. Ten switches will not fill even a small board on their own, so treat this listing as a sample pack for feeling out the Choc Brown tactile bump, a spare parts stash for a board that already uses these switches, or a way to test compatibility with a PCB before ordering in bulk. Kailh's Choc 1350 line is one of the most widely supported low profile switch families among hobbyist keyboard makers, so parts, keycaps, and PCBs designed around it are easier to find than for less common low profile switches. Anyone assembling a full keyboard should plan to buy a second, larger pack once they confirm this is the switch they want, since running short mid-build means a delayed project while more stock ships in.

Features and specs

Kailh lists the Choc 1350 Brown as a 5-pin tactile switch with roughly 1.5mm of pre-travel and 3mm of total travel, an actuation force around 50gf and a tactile force near 60gf, figures pulled from Kailh's own switch documentation rather than this listing's page. The 5-pin design and built-in LED slot support SMD lighting, meaning boards wired for under-switch RGB can shine through the switch housing, matching the RGB SMD name in the title. Kailh rates the switch family for roughly 50 million keystrokes, a durability figure aimed at daily typing and gaming rather than industrial use. The housing size is the standard Choc footprint at 15mm by 15mm, which is shorter than an MX switch, so it will not physically fit MX-cut plates or MX hot-swap sockets without a Choc-specific PCB or plate.

Build and materials

Kailh manufactures the Choc 1350 line with the same nylon housing and stem materials used across its low profile catalog, and as an official Kailh listing this pack should match the switch feel found in Kailh's other Choc Brown products rather than a clone or rebrand. The tactile bump on Choc switches tends to register lower on the finger than a full-height MX tactile switch simply because there is less travel to work with, so the bump can feel sharper and quicker even though the peak force is similar to a typical MX Brown. Build quality on Kailh's own Choc switches has generally been consistent across colorways in community testing, since Kailh controls manufacturing for the entire Choc line rather than licensing it to third parties, which matters for anyone comparing this pack against unbranded alternatives.

Value for the price

At 10 pieces this is priced as a sampler rather than a bulk order, so the per-switch cost will look high next to 35 or 45 piece packs of the same switch. That trade-off makes sense if the goal is testing feel or fixing two or three dead switches on an existing board, but it is a poor way to source switches for a full build since shipping and per-order fees get paid again on the larger order that follows. Buyers planning a complete low profile keyboard should compare total cost per switch across pack sizes before committing to this listing, and should only buy the small pack first if they are unsure whether Choc Brown is the right feel for their build.

How it compares

Inside mechkeeblab's low-profile switch guide this pack ranks in the middle of the field, behind higher-scoring Choc V2 and Choc Red options that offer more switches per pack and, in the case of Choc V2, MX-compatible stems that widen keycap choice. The Choc 1350 platform used here is the older but still current Kailh Choc generation, and Brown tactile is a reasonable middle ground between Choc Red linear and Choc White clicky for people who want feedback without full click noise. Anyone choosing between this and a Choc V2 switch should weigh keycap availability, since V2's MX stem opens up far more keycap sets than the 1350's Choc-only stem shape.

Frequently asked questions