Keychron Silk POM Tactile Brown Switches 110pcs Pre-Lubed 55gf 5-Pin Hot-Swap Full POM Housing & Stem Review (2026)

Fit for the job

With 110 switches included, this pack has enough for a full-size 104 to 108 key board with a handful of spares left over, so it suits builders assembling a complete hot-swap keyboard rather than just testing a few keys. The tactile feel is aimed at typists who want feedback confirming each keystroke without the sharp, pronounced bump some tactile switches produce, making it a reasonable middle ground between a smooth linear and a stiff, clicky tactile switch. Gamers who prefer the fastest possible linear feel, or typists who specifically want a very sharp, defined tactile bump, may find this switch's subtler character less suited to their preference.

Features and specs

According to Keychron's published specifications, these switches use a 55 gram tactile actuation force with roughly 2mm of pre-travel and 4mm of total travel, rated for up to 50 million keystrokes. The 5-pin design is intended for standard hot-swap sockets, and the switches arrive factory pre-lubed, saving the time and effort of lubing 110 switches individually before installation. Keychron also describes a translucent light diffuser built into the housing, intended to let RGB backlighting pass through more evenly for brighter, more uniform per-key lighting compared to switches without a diffuser feature built in, a detail that matters most on boards with per-key RGB rather than single-color backlighting.

Build and materials

Both the housing and stem are made from POM, a material generally associated with a smoother, less scratchy travel feel and a deeper, more muted sound compared to switches using polycarbonate or nylon housings. Reviewers commonly describe Keychron's Silk POM switches as close to wobble-free with a textured stroke feel characteristic of POM construction, and note that the tactile bump itself is softer and more subtle than what many switches marketed as tactile deliver, which some buyers find surprising if they expect a sharper bump based on the tactile label alone. This combination of materials favors a refined, quiet-leaning sound over a loud or clacky one.

Value for the price

A 110-piece pack with published force and travel specifications, factory lubing, and premium full POM construction sits at the higher end of the switch market, priced above basic linear or tactile packs that use cheaper housing materials or skip factory lubing entirely. The value case rests on getting a full board's worth of switches from an established, well-documented brand in one purchase, with consistent quality control that smaller or unbranded switch makers cannot always guarantee. Buyers specifically chasing the deepest, most muted tactile sound and smoothest travel feel available are the best fit for paying this premium over cheaper alternatives.

How it compares

In mechkeeblab's tactile switch guide this pack ranks first among a field that includes several Gateron G Pro variants and a Gazzew Boba tactile option, ahead largely because Keychron's brand recognition, published specifications, and factory lubing give buyers more certainty than smaller-name competitors offer at a similar price. It scores clearly above the YMDK transparent-case tactile switches also included in the guide, which use simpler polycarbonate construction rather than full POM. Buyers who specifically want the sharpest, most defined tactile bump rather than a subtle one may still prefer the Gazzew Boba option ranked just below it, while anyone prioritizing brand consistency and factory lubing should stick with this pack.

Frequently asked questions